Concrete
Ensayos en Hormigón Fresco
Portable slump cone test kit 54-C0149/B, 54-C0150/C
Esta sección incluye equipos de toma de muestras y mezcla de hormigón fresco, así como una amplia gama de equipos de ensayo para determinar la trabajabilidad, consistencia, contenido de aire, exudación, densidad y tiempo de fraguado del hormigón fresco. Además, podrá encontrar los principales equipos para realizar ensayos de hormigón autocompactante ( SCC)) según las normas EN. Por último, hay algunos ensayos de especialidad, dedicados principalmente a las fábricas de cemento y a los fabricantes de aditivos, como la compactación giratoria y la determinación del calor de hidratación en condiciones adiabáticas.
Slump Cone Test Sets
The slump cone, also known as Abrams cone, is used to measure workability of fresh concrete
Vebè Consistometer
This test method is used to measure the consistency of stiff to extremely dry concrete.
Concrete Flow Table
The apparatus consists of a double wooden table measuring 700x700 mm hinged at one side.
Concrete mixers
Pan type models have been selected for laboratory use, to prepare concrete specimens and sampl
Adiabatic concrete calorimeter
When concrete is curing and hardening, the hydration reaction of cement develops a large amount o
Air entrainment meters
For the determination of air content of compacted fresh concrete
Bleeding of concrete
This test method is used to determine the relative quantity of mixing water that will bleed from
Compacting Factor Apparatus
The apparatus consists of two conical hoppers having a hinged trap door attached to the lower...
Concrete mortar penetrometers
To evaluate the initial set of concrete
Concrete Workabilimeter
Used to verify the homogeneity of concrete in relation to its workability or plasticity.
Gyratory Compactors for Cement and Concrete - GALILEO
The method is used for: mix design simulating selected production processes specimen...
J-Ring Apparatus
The apparatus consists of a stainless steel crown with 16 bars 18 mm diameter.
K-Slump Tester
This device is used to determine the workability and degree of compaction of fresh concrete
Kelly Ball
This method is used to determine the penetration of a hemispherical metal weight into fresh concrete
L-Box Apparatus
The apparatus consists of a L shaped stainless steel frame, supplied complete with filling hopper.
SCC Slump Cone
The test is performed for determining the slump flow and t500 time for self-compacting concrete.
Sieve Segregation Test Set
Used for determining the sieve segregation resistance of self-compacting concrete.
Unit weight measures
Used to determine the density of fresh concrete